- 您的位置:
- 中国标准在线服务网 >>
- 全部标准分类 >>
- 国家标准 >>
- T35 >>
- GB/T 20234.1-2015e 电动汽车传导充电用连接装置 第1部分:通用要求

【国家标准】 电动汽车传导充电用连接装置 第1部分:通用要求
本网站 发布时间:
2024-03-12
- GB/T 20234.1-2015e
- 被代替
开通会员免费在线看70000余条国内标准,赠送文本下载次数,单本最低仅合13.3元!还可享标准出版进度查询、定制跟踪推送、标准查新等超多特权!  
查看详情>>

文前页下载
适用范围:
This Part of GB/T 20234 sets out the definition of connection set for electric vehicle conductive charging,as well as the requirements,test procedures and inspection rules.
This Part applies to connection set for conductive charging of electric vehicles,of which:
—The rated AC voltage does not exceed 690 V,with frequency at 50 Hz,and rated current not exceeding 250 A;
—The rated DC voltage does not exceed 1 000 V,with rated current not exceeding 400 A.
If the plug and socket-outlet of connection set for charging are assembled by the standardized plug and socket-outlet in compliance with GB 2099.1 and GB 1002,this Part of GB/T 20234 does not apply to such plug and socket-outlet.
NOTE Throughout this Part,vehicle refers to an off-vehicle chargeable (OVC) electric vehicle.
This Part applies to connection set for conductive charging of electric vehicles,of which:
—The rated AC voltage does not exceed 690 V,with frequency at 50 Hz,and rated current not exceeding 250 A;
—The rated DC voltage does not exceed 1 000 V,with rated current not exceeding 400 A.
If the plug and socket-outlet of connection set for charging are assembled by the standardized plug and socket-outlet in compliance with GB 2099.1 and GB 1002,this Part of GB/T 20234 does not apply to such plug and socket-outlet.
NOTE Throughout this Part,vehicle refers to an off-vehicle chargeable (OVC) electric vehicle.
标准号:
GB/T 20234.1-2015e
标准名称:
电动汽车传导充电用连接装置 第1部分:通用要求
英文名称:
Connection set for conductive charging of electric vehicles—Part 1:General requirements标准状态:
被代替-
发布日期:
2015-12-28 -
实施日期:
2016-01-01 出版语种:
英文
起草人:
WuZhixin,CaiJun,NiFeng,ZhouRong,MengXiangfeng,LiuYongdong,HuangXin,LiuBo,YanHui,WangHongjun,ShaoZhehai,LuGuowei,XuXiao,LiuJialiang,LuKewei,LiuQiang,LiZhigang,PengBo,ZhouGuangrong,DongXinsheng,MaJianweiandBaiJian.起草单位:
China Automotive Technology and Research Center,China Electricity Council,and China National Electric Apparatus Research Institute Co.,Ltd.归口单位:
National Technical Committee of Auto Standardization (SAC/TC 114).提出部门:
Ministry of Industry and Information Technology of the People’s Republic of China.发布部门:
General Administration of Quality Supervision,Inspection and Quarantine of the People's Republic of China and Standardization Administration of the People's Republic of China
- 推荐标准
- 国家标准计划
- GB 44263-2024 电动汽车传导充电系统安全要求
- GB 39752-2024 电动汽车供电设备安全要求
- GB/T 43253.1-2023 道路车辆 功能安全审核及评估方法 第1部分:通用要求
- GB/T 43253.2-2023 道路车辆 功能安全审核及评估方法 第2部分:概念阶段和系统层面
- GB/T 43253.3-2023 道路车辆 功能安全审核及评估方法 第3部分:软件层面
- GB/T 43253.4-2023 道路车辆 功能安全审核及评估方法 第4部分:硬件层面
- GB/T 43267-2023 道路车辆 预期功能安全
- GB/T 43254-2023 电动汽车用驱动电机系统功能安全要求及试验方法
- GB/T 20234.1-2023 电动汽车传导充电用连接装置 第1部分:通用要求
- GB/T 20234.3-2023 电动汽车传导充电用连接装置 第3部分:直流充电接口
- GB/T 38775.8-2023 电动汽车无线充电系统 第8部分:商用车应用特殊要求
- GB/T 18487.1-2023 电动汽车传导充电系统 第1部分:通用要求
- GB/T 20234.4-2023 电动汽车传导充电用连接装置 第4部分:大功率直流充电接口
- GB/T 42711-2023 立体停车库无线供电系统 技术要求及测试规范
- GB/Z 42285-2022 道路车辆 电子电气系统ASIL等级确定方法指南